TrickLaser Ball-Cup Arms

User avatar
James
Posts: 14
Joined: Fri Apr 21, 2017 1:15 pm

Re: TrickLaser Ball-Cup Arms

Post by James » Mon Oct 30, 2017 2:58 pm

So I'm putting together the printer now with the new parts, as well as other color replacements for black and I've reached the carriages and I can't quite figure out the best method for tightening the belts.. Do you start with the bottom and wedge the belt in there, then loop it around and do the top? so me that is what would make the most sense.

just looking for confirmation. don't wanna screw anything up =)
sLpFhaWK
K250VS BSE
K300VS BSE Custom
Metal Max
Kossel Mini
CoreXY D-Bot

User avatar
UltiBots
Posts: 602
Joined: Fri Apr 21, 2017 10:18 am

Re: TrickLaser Ball-Cup Arms

Post by UltiBots » Mon Oct 30, 2017 4:12 pm

What works for me...
  1. Wedge belt in lower carriage mount
  2. Feed belt up and over upper pulley
  3. Adjust belt and wedge in tension mount so belt starts to tighten at first contact with dove tail on carriage
  4. With one hand compress tensioner enough to start threading M3x20 screw with other hand
  5. Tension as needed
  6. If over/under tension go to step 3
Brad - UltiBots LLC

BSE_Ted
Posts: 25
Joined: Mon Apr 24, 2017 11:14 am

Re: TrickLaser Ball-Cup Arms

Post by BSE_Ted » Wed Nov 15, 2017 2:40 pm

Installing the little nut into the carriage tensioners was driving me crazy. Cleaning out the little slot so that the fastener would fit in was next to impossible, and jamming the fastener in only to have it get stuck 9/10ths of the way is infuriating.

As with most of my moments of clarity, I realized I had solved the same problem years ago and simply forgot about it. I dug out some M3 threaded inserts, drilled out the tensioner for them and melted them in. Problem solved.

Image

User avatar
W3DRK
Posts: 4
Joined: Thu Sep 21, 2017 10:01 am

Re: TrickLaser Ball-Cup Arms

Post by W3DRK » Wed Nov 15, 2017 2:51 pm

BSE_Ted: I must agree - fussing to get those M3 nuts jammed into place was cause for a few near tool-throwing moments for me. This is a brilliant idea!
Last edited by W3DRK on Thu Nov 16, 2017 8:54 am, edited 1 time in total.

wesc
Posts: 24
Joined: Wed Aug 02, 2017 7:58 pm

Re: TrickLaser Ball-Cup Arms

Post by wesc » Thu Nov 16, 2017 2:15 am

Using some anti-seize can make the captured nuts more workable. a little CA adhesive carefully applied so it doesn't get into the threads also can help.

Post Reply