eSteps/mm

Steve

eSteps/mm

Post by Steve » Thu May 03, 2018 4:15 pm

I printed a 20mm Calibration Cube. The X and Y axis were ~ .5 mm too large. I changed the Esteps/MM in config.g. I ran the bed level Calibration and the nozzle stopped several mm above the surface. Do I need to do a Recommission after the changes?

User avatar
UltiBots
Posts: 592
Joined: Fri Apr 21, 2017 10:18 am

Re: eSteps/mm

Post by UltiBots » Tue Jun 19, 2018 9:29 pm

Changing the Esteps adjusts how much the extruder extrudes. If you are having issues with XY dimensions I recommend http://www.sublimelayers.com/2018/03/mu ... parts.html particularly step 9.

Adjusting arm length changes the XY dimensions.

Also look at:
search.php?keywords=arm+length
search.php?keywords=dimension
search.php?keywords=accuracy
viewtopic.php?f=35&t=240


Last bumped by Anonymous on Tue Jun 19, 2018 9:29 pm.
Brad - UltiBots LLC

Post Reply