Titan Aero Air flow

Post Reply
becega
Posts: 9
Joined: Mon Apr 24, 2017 1:11 pm

Titan Aero Air flow

Post by becega » Mon Apr 09, 2018 7:26 pm

Should the Fan in the Aero be pulling air or pushing the air to the heatsink?
Thanks
Benjamin

User avatar
UltiBots
Posts: 592
Joined: Fri Apr 21, 2017 10:18 am

Re: Titan Aero Air flow

Post by UltiBots » Mon Apr 09, 2018 7:35 pm

Please refer to the Titan Aero Guide https://e3d-online.dozuki.com/Guide/Tit ... ssembly/23

Currently our reference PLUS has the fan sucking across the fins and exhausting away from the extruder. This could/should be asked on the E3D forum. If you do... please report back.
Brad - UltiBots LLC

becega
Posts: 9
Joined: Mon Apr 24, 2017 1:11 pm

Re: Titan Aero Air flow

Post by becega » Mon Apr 09, 2018 10:54 pm

Thanks Brad, that is how its working on mine. And it looks to be printing fine. Just wanted to double check

Post Reply