Cylcops/Chimera w/ Dual Zesty Nimble

Post Reply
kwisatzsawyer

Cylcops/Chimera w/ Dual Zesty Nimble

Post by kwisatzsawyer » Mon Feb 26, 2018 12:40 pm

Has anyone tested a E3D Cyclops or Chimera hotend with a Dual Zesty Nimble extruders on the D300VS+? This seems like a great way to maintain the benefits of direct drive, gain the ability to print with two materials (not interested in dual colors but dissolvable supports). Looking at the dimensions, the Chimera/Cyclops should even yield an increase in build height when using Zesty's Effector (https://www.thingiverse.com/thing:2406731). I could be wrong, but the Titan Aero Extruder on the D300VS+ seems to mount all of the components below the effector whilst Zesty's effector puts the extruder above the effector.

How feasible would this mod be? Please post build notes if you've already made this mod!

Thanks,

Mike

User avatar
UltiBots
Posts: 592
Joined: Fri Apr 21, 2017 10:18 am

Re: Cylcops/Chimera w/ Dual Zesty Nimble

Post by UltiBots » Sat Mar 10, 2018 11:02 am

As this is not a direct support question... you may get more response from on FB.


Last bumped by Anonymous on Sat Mar 10, 2018 11:02 am.
Brad - UltiBots LLC

Post Reply