Extruder motor stops during print…

Post Reply
AndyS
Posts: 13
Joined: Fri Jul 14, 2017 5:43 pm

Extruder motor stops during print…

Post by AndyS » Wed Jan 16, 2019 8:00 pm

Just posting for more visibility:

If your printer extruder stops mid-print but otherwise the printer continues to ghost print and it's not clogging or a gcode issue, it could be static build up on the extruder motor. The fix is grounding the body. I went ahead and grounded the neg. supply of the DC power supply while I was at.

See: https://forum.duet3d.com/topic/3483/ext ... ring-print

Post Reply