I hear a clicking sound when I extrude using the Duet Web Interface. What is this?

Post Reply
User avatar
UltiBots
Posts: 602
Joined: Fri Apr 21, 2017 10:18 am

I hear a clicking sound when I extrude using the Duet Web Interface. What is this?

Post by UltiBots » Mon Apr 24, 2017 7:46 pm

When using the Duet Web Interface, we recommend using "Extruder Control" speeds at 5mm/sec to extrude and retract filament. No faster than 10mm/sec or you may hear stepper stalling. The geared PG35L stepper is not a NEMA 17 as it has its own stepper circuitry.
.
Screen Shot 2017-04-24 at 8.45.30 PM.png
Screen Shot 2017-04-24 at 8.45.30 PM.png (21.71 KiB) Viewed 740 times

NOTE!!! this is DIFFERENT from slicing speeds. This extruder is capable of printing in excess of 100mm/sec.
Brad - UltiBots LLC

Post Reply