Search found 55 matches

by ofloveandhate
Sun Feb 25, 2018 5:34 pm
Forum: Print Defects
Topic: extruder motor stops turning
Replies: 83
Views: 10337

Re: extruder motor stops turning

brad, can you please post your S3D settings in an importable form?
by ofloveandhate
Sun Feb 25, 2018 5:32 pm
Forum: Print Defects
Topic: extruder motor stops turning
Replies: 83
Views: 10337

Re: extruder motor stops turning

here's a diff on the top of the files: (brad's left, danielle's (OP) on the right) diff -y Dropbox/3dprinting/troubleshooting/dpla_Pencil_holder.gcode gcode_moveme/simplify_d300/pencil_holder.gcode ; G-Code generated by Simplify3D(R) Version 4.0.0 ; G-Code generated by Simplify3D(R) Version 4.0.0 ; ...
by ofloveandhate
Tue Feb 20, 2018 12:35 pm
Forum: Print Defects
Topic: extruder motor stops turning
Replies: 83
Views: 10337

Re: extruder motor stops turning

thanks! PLA 1.75mm, printing at 180. i use a bed temp of 65.

i've been printing the tobel model at 40% scale, the pencil holder at 100%.
by ofloveandhate
Sun Feb 18, 2018 3:32 pm
Forum: Print Defects
Topic: extruder motor stops turning
Replies: 83
Views: 10337

Re: extruder motor stops turning

i had another failure, with another much simpler gcode file, after two successful prints of tobel_small_40. what is up with this? video of it in failed state: https://imgur.com/tojeSGg thingiverse thing: www.thingiverse.com/thing:1325680/ gcode attached. ; Build Summary ; Build time: 1 hour 15 minut...
by ofloveandhate
Fri Feb 16, 2018 5:50 pm
Forum: Print Defects
Topic: extruder motor stops turning
Replies: 83
Views: 10337

Re: extruder motor stops turning

attached is a much smaller print which has failed. so far, this is the smallest failing gcode file i have. i make no claim that it will fail every time, just that it has for me. estimated size and time are as follows: ; Build Summary ; Build time: 3 hours 56 minutes ; Filament length: 14726.7 mm (14...
by ofloveandhate
Thu Feb 15, 2018 10:39 am
Forum: Print Defects
Topic: extruder motor stops turning
Replies: 83
Views: 10337

Re: extruder motor stops turning

thanks for the encouragement. i am trying to get a file that consistently fails, but is quick to print. not there yet, sadly, but maybe this latest one...
by ofloveandhate
Wed Feb 14, 2018 1:28 pm
Forum: Print Defects
Topic: extruder motor stops turning
Replies: 83
Views: 10337

Re: extruder motor stops turning

added a heatbreak out of lexan, with a fan blowing directly across the duet. https://i.imgur.com/L3B7XHo.jpg the print still failed. https://i.imgur.com/Cm0hQS9.jpg here is what it is supposed to look like: https://i.imgur.com/SO3uFq6.jpg i think we can rule out heat as the source of the problem. be...
by ofloveandhate
Mon Feb 12, 2018 11:46 am
Forum: Print Defects
Topic: extruder motor stops turning
Replies: 83
Views: 10337

Re: extruder motor stops turning

ok. the cooling fan being the problem should generate an error recorded into the log visible from the web interface. (unless it fails to log if you are not connected, something i have mild concern about...) . i am making a heatbreak out of a piece of Lexan i picked up yesterday at Menard's. hopefull...
by ofloveandhate
Sat Feb 10, 2018 10:46 am
Forum: Print Defects
Topic: extruder motor stops turning
Replies: 83
Views: 10337

Re: extruder motor stops turning

M122 === Diagnostics === Used output buffers: 3 of 32 (13 max) === Platform === RepRapFirmware for Duet WiFi version 1.20 running on Duet WiFi 1.0 Board ID: 08DDM-9FAM2-LW4SD-6JKD0-3SN6N-T2ZVY Static ram used: 15448 Dynamic ram used: 99152 Recycled dynamic ram: 88 Stack ram used: 1392 current, 8448...
by ofloveandhate
Sat Feb 10, 2018 10:36 am
Forum: Print Defects
Topic: extruder motor stops turning
Replies: 83
Views: 10337

Re: extruder motor stops turning

we got another failure, this time with relative extrusions off (using absolute extruder distances). below is the difference between the failing print on the left, and the succeeding print on the right. FAILED TWO SUCCEEDED ; G-Code generated by Simplify3D(R) Version 4.0.0 ; G-Code generated by Simpl...