Search found 16 matches

by Boris
Tue Jun 06, 2017 4:57 pm
Forum: First Print(s)
Topic: New layer start issue
Replies: 4
Views: 1002

Re: New layer start issue

like in the screenshot, in my example orient all rear edges to X+.
you could also leave the orientation as you want and adjust the setting in the process tab.
basically you´re just pointing into a direction, you dont have to set an exact start "point".

Boris
by Boris
Tue Jun 06, 2017 2:08 pm
Forum: First Print(s)
Topic: New layer start issue
Replies: 4
Views: 1002

Re: New layer start issue

If you take a look at the S3D factory files 3dLabPrints delivers, you will notice that they were also facing this problem. They arrange all layer start points to the rear edge of the wing. So when some of the small inner structure of the part is printed, there is a quite long movement back to the re...
by Boris
Tue Jun 06, 2017 2:02 pm
Forum: Issues & Requests
Topic: Forum features
Replies: 2
Views: 1167

Re: Forum features

Thanks!

Boris
by Boris
Fri Jun 02, 2017 4:59 pm
Forum: Slicers
Topic: How to reduce super fine stringing?
Replies: 20
Views: 3500

Re: How to reduce super fine stringing?

i´m really not familiar enough with slic3r to tune in some settings like these :roll: but here is the actual PLA fff profile for s3d: please notice that there is no start gcode in this profile. i always do a G28 and G32 manually over the duet3d interface when powering on the printer. the end gcode i...
by Boris
Fri Jun 02, 2017 4:49 pm
Forum: Slicers
Topic: How to reduce super fine stringing?
Replies: 20
Views: 3500

Re: How to reduce super fine stringing?

Thank you Brad! Glad i could help.
Gonna print some more of these i think because generally i like the idea of the big z-hop like Michael does. Just need to dial that in with a few more tries.

Boris
by Boris
Fri Jun 02, 2017 4:24 pm
Forum: Issues & Requests
Topic: Forum features
Replies: 2
Views: 1167

Forum features

Hey guys! 2 things.... My E-mail notification for new posts in this forum doesn´t work. is this a known issue? would be great to know if there is a reply in a thread i´m interested in. And second - would it be possible to implement an easier image upload directly to the forum? it´s quite uncomfortab...
by Boris
Fri Jun 02, 2017 4:20 pm
Forum: Slicers
Topic: How to reduce super fine stringing?
Replies: 20
Views: 3500

Re: How to reduce super fine stringing?

the fan is at 40% and increases up to 100 if layer time is under 15sec. also bridging is at 100% fan speed but S3D doesn´t notice any bridging on this part because it´s only perimeters (yes... logic *facepalm*).

z-hop is visible on the screenshot - it´s at 0.3mm
by Boris
Fri Jun 02, 2017 3:46 pm
Forum: Slicers
Topic: How to reduce super fine stringing?
Replies: 20
Views: 3500

Re: How to reduce super fine stringing?

gcode file without G28 and G32 - home via Duet3D interface before starting!

Retraction.gcode
by Boris
Fri Jun 02, 2017 3:45 pm
Forum: Slicers
Topic: How to reduce super fine stringing?
Replies: 20
Views: 3500

Re: How to reduce super fine stringing?

Image
by Boris
Fri Jun 02, 2017 3:03 pm
Forum: Slicers
Topic: How to reduce super fine stringing?
Replies: 20
Views: 3500

Re: How to reduce super fine stringing?

no problems at all with 0.3mm z-hop and 5mm wipe for the outer perimeter.

Image

Image

Image